Filter
Top Products
Configuring System Information 231
The
General Settings
page contains the following fields:
Current
— Maximum number of entries.
After Reset
— Maximum number of entries after the device is reset. By entering a value in this
column, memory is allocated to the field table.
Max RAM Log Entries (20-400)
— Maximum number of RAM Log table
entries. The default
value is 200 entries.
Jumbo Frames
— Enables the transportation of identical data in fewer frames. This ensures less
overhead, lower processing time, and fewer interrupts. Internal frames may be effected by enabling
Jumbo frames.
Enabling Jumbo Packets
1
Open the
General Settings
page.
2
Select
Enabled
in the
Jumbo packets
field.
3
Click
Apply Changes
.
Jumbo packets are enabled on the device.
Viewing General Settings Using the CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
General Settings
page.
The following is an example of the CLI commands:
Console (config)# logging buffered size 300
Console (config)#port jumbo-frame
Table 6-49. General Settings CLI Commands
CLI Command Description
logging buffered
size
number
Sets the number of syslog messages stored in
the internal buffer (RAM).
port jumbo-frame Enables jumbo packets for the device.