Filter
Top Products
Configuring Quality of Service 427
Selecting a Service Mode
1
Open the
QoS Settings
page.
2
Select a service mode in the
QoS Mode
field.
3
Click
Apply Changes
.
The QoS mode is selected, and the device is updated.
Setting the Default CoS Value for Incoming Traffic on an Interface
1
Open the
QoS Settings
page.
2
Select an interface, and set the default CoS value for incoming traffic from the drop-down
menu.
3
Click
Apply Changes
.
The default CoS value for incoming traffic on the interface is selected, and the device is
updated.
Copying QoS Interface Settings
1
Open the
QoS Settings
page.
2
Click
Show All
to display the
QoS Interface Settings Table
page.
3
Select an interface from which to copy QoS settings to all or any of the interfaces listed in the
QoS Interface Settings Table.
4
Check the
Copy to
check box for each interface to which the QoS settings should be copied,
or click
Select All
to copy the QoS settings to all listed interfaces.
5
Click
Apply Changes
.