Filter
Top Products
Configuring System Information 163
Configuring UDP Relay
UDP Relay allows UDP packets to reach other networks. This feature enables browsing from
workstations to servers on different networks.
To open the
UDP Relay
page, click
System
→
IP Addressing
→
UDP Relay
in the tree view.
Figure 6-38. UDP Relay
The
UDP Relay
page contains the following fields:
Source IP Interface
— The input IP interface that relays UDP packets. If this field is
255.255.255.255, UDP packets from all interfaces are relayed. The following address ranges are
invalid:
0.0.0.0 to 0.255.255.255.
127.0.0.0 to 127.255.255.255.
UDP Destination Port (1-65535)
— The destination UDP port ID number of UDP packets to be
relayed. The following table lists UDP Port allocations.
Table 6-26. UDP Port Allocations
UDP Port Number Acronym Application
7 Echo Echo
11 SysStat Active User