Filter
Top Products
382 Configuring Routing
www.dell.com | support.dell.com
Upstream Neighbo
r — IP address of the upstream RPF neighbor, from which source IP datagrams
are received.
Upstream Interface
— The upstream interface IP address.
Metric
— Distance in hops to the source subnet.
Expiry Time
— Amount of time before the entry is aged out.
Up Time
— Amount of time that has passed since the router was learned by the router.
Viewing the DVMRP Route Table Using CLI Commands
The following table contains the CLI command for viewing the DVMRP Route Table.
The following is an example of the CLI command:
Console> show ip dvmrp route
Source Neighbor Interface Metric Expiry
Up Time Time
------------------------------------------------------
171.68.0.0/16 192.168.1.2816 eth g116
11016 100:02:5216 107:55:50
DVMRP Next Hop Table
The
DVMRP Next Hop Table
page contains information regarding the outgoing interface’s next
hop for IP multicast packets. To open the
DVMRP Next Hop Table
page, click
Router
→
IP
Multicast
→
DVMRP Next Hop Table
in the tree view.
Table 8-21. DVRMP Route Table CLI Command
CLI Command Description
show ip dvmrp route [
ip-
address
] [
ip-address
]
Shows the DVMRP route table.