Filter
Top Products
214 Configuring System Information
www.dell.com | support.dell.com
Deleting Communities
1
Open the
SNMPv1, 2 Community
page.
2
Click
Show All
.
The
SNMPv1,2 Community Tables
page opens.
3
Select a community and check the
Remove
check box.
4
Click
Apply Changes
.
The community entry is deleted, and the device is updated.
Configuring Communities Using CLI Commands
The following table summarizes equivalent CLI commands for defining fields displayed in the
SNMPv1, 2 Community
page.
The following is an example of CLI commands:
Console (config)# snmp-server community dell ro 10.1.1.1
Defining SNMP Notification Filters
The
Notification Filter
page permits filtering traps based on OIDs. Each OID is linked to a device
feature or a feature aspect. The
Notification Filter
page also allows network managers to filter
notifications.
To open the
Notification Filter
page
,
click
System
→
SNMP
→
Notification Filters
in the tree view.
Table 6-43. SNMP Community CLI Commands
CLI Command Description
snmp-server community
community
[ro | rw |
su] [
ip-address
][view
view-name
][type
{router | oob}]
Sets up the community access string to permit
access to the SNMP protocol.
snmp-server
community-group
community group-name
[
ip-address
] [type
{router | oob}]
Sets up comunity access string to permit limited
access to the SNMP protocol based on group
access rights.
show snmp Displays the current SNMP device
configuration.