Filter
Top Products
240 Configuring Switch Information
www.dell.com | support.dell.com
Status
— The host status. The possible field values are:
Unauthorized
— Indicates that the port control is
Force Unauthorized,
the port link is down
or the port control is Auto, but a client has not been authenticated via the port.
Not in auto mode
— Indicates that the port control is
Forced Authorized
, and clients have full
port access.
Single-host Lock
— Indicates that the port control is
Auto
and a single client has been
authenticated via the port.
No Single Host
— Indicates that Multiple Host is enabled.
Number of Violations
— The number of packets that arrived on the interface in single-host mode,
from a host whose MAC address is not the client (supplicant) MAC address.
Displaying the Multiple Hosts Table
1
Open the
Multiple Hosts
page.
2
Click
Show All
.
The
Multiple Hosts Table
opens.
Figure 7-4. Multiple Hosts Table
Enabling Multiple Hosts Using the CLI Commands
The following table summarizes the equivalent CLI commands for enabling the advanced port
based authentication as displayed in the
Multiple Hosts
page.
Table 7-2. Multiple Hosts CLI Commands
CLI Command Description
dot1x multiple-hosts Allows multiple hosts (clients) on an 802.1X-
authorized port that has the dot1x port-control
interface configuration command set to auto.