Filter
Top Products
244 Configuring Switch Information
www.dell.com | support.dell.com
Defining a Locked Port
1
Open the
Port Security
page.
2
Select an interface type and number.
3
Select
Locked
on the
Set Port
drop-down menu.
4
Complete the remaining fields.
5
Click
Apply Changes
.
The locked port is added to the Port Security table, and the device is updated.
Copying Parameters in the Locked Port Table
1
Open the
Port Security
page.
2
Click
Show All to display
the
Port Security Table
.
The fields in the Port Security Table are the same as the fields in the
Port Security
page.
3
In the
Copy Parameters from
field, select an interface in either the
Port
or
LAG
drop-down
menu.
The port security definitions for this interface are copied to the selected interfaces, see step 5.
4
Check the
Copy to
check box to select the interfaces to which the port security definitions
are copied.
Or
Click
Select All
to copy the definitions to all ports or LAGs.
5
Click
Apply Changes
.
The parameters are copied to the selected port ports or LAGs in the
Port Security Table
, and
the device is updated.
Configuring Locked Port Security with CLI Commands
The following table summarizes the equivalent CLI commands for configuring locked port security
as displayed in the
Port Security
page.
Table 7-4. Locked Port Security CLI Commands
CLI Command Description
port security [forward |
discard | discard-shutdown]
[trap
seconds
]
Disables new address learning on an
interface.
show ports security [ethernet
interface
| port-channel port-
channel-number
]
Displays the port-lock status.