Filter
Top Products
310 Configuring Switch Information
www.dell.com | support.dell.com
Configuring GVRP Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring GVRP as displayed
in the
GVRP Global Parameters
page.
The following is an example of the CLI commands:
Console (config)# gvrp enable
Console (config)# interface ethernet g8
Console (config-if)# gvrp enable
Console (config-if)# gvrp vlan-creation-forbid
Console (config-if)# gvrp registration-forbid
Console> show gvrp configuration
GVRP Feature is currently Enabled on the device.
Table 7-28. GVRP Global Parameters CLI Commands
CLI Command Description
gvrp enable (global) Enables GVRP globally.
gvrp enable (interface) Enables GVRP on an interface.
gvrp vlan-creation-forbid Enables or disables dynamic VLAN
creation.
gvrp registration-forbid De-registers all dynamic VLANs, and
prevents dynamic VLAN registration on
the port.
show gvrp configuration
[ethernet
interface
| port-
channel
port-channel-
number
]
Displays GVRP configuration information,
including timer values, whether GVRP and
dynamic VLAN creation is enabled, and
which ports are running GVRP.
show gvrp error-statistics
[ethernet
interface
| port-
channel
port-channel-
number]
Displays GVRP error statistics.
show gvrp statistics
[ethernet
interface
| port-
channel
port-channel-
number
]
Displays GVRP statistics.
clear gvrp statistics
[ethernet interface | port-
channel
port-channel-
number
]
Clears all the GVRP statistics information.