Filter
Top Products
334 Configuring Routing
www.dell.com | support.dell.com
Configuring IP Static Routes
Use the IP Static Route page to define static routes.
To open the IP Static Route page, click
Router
→
Global Routing Parameters
→
IP Static Route
in
the tree view.
Figure 8-2. IP Static Route Page
Destination IP Address
— Static route’s destination IP network.
Network Mask
—The destination network mask for this route.
Prefix
Length
— The number of bits that comprise the destination IP address prefix. The length is
between 1-32 bits.
Next Hop
— Indicates the next system address on the route.
Route Type
— Specifies how remote routing is handled. The possible field values are:
Remote
— Packet is forwarded.
Reject
— Packet is dropped.
Local
— Packet is sent to a local network.
Metric (1-255)
— Number of hops to the destination network.
Adding Static IP Routes
NOTE: Only a directly connected router can be defined as a gateway.