Filter
Top Products
Using Dell OpenManage Switch Administrator 57
To list the Privileged EXEC commands, type a question mark at the command prompt and
press <Enter>.
To return from Privileged EXEC Mode to User EXEC Mode use any of the following
commands:
disable
,
exit/end
, or <Ctrl><Z>.
The following example illustrates accessing privileged EXEC mode and then returning to the User
EXEC mode:
console>enable
Enter Password: ******
console#
console#disable
console>
Use the
exit
command to move back to a previous mode. For example, you can move from
Interface Configuration mode to Global Configuration mode, and from Global Configuration
mode to Privileged EXEC mode.
Global Configuration Mode
Global Configuration commands apply to system features, rather than a specific protocol or
interface.
To access Global Configuration mode, at the Privileged EXEC Mode prompt, type
configure
and press <Enter>. The Global Configuration Mode displays as the device host name followed by
the pound sign # and (config).
console(config)#
To list the Global Configuration commands, enter a question mark at the command prompt.
To return from Global Configuration mode to Privileged EXEC mode, type the
exit
command or
use the <Ctrl><Z> command.
The following example illustrates how to access
Global Configuration Mode
and return back to the
Privileged EXEC Mode
:
console#
console#configure
console(config)#exit
console#