Filter
Top Products
374 Configuring Routing
www.dell.com | support.dell.com
Defining IGMP Static Interface Groups
The
IGMP Static Group Table
enables static definition of IGMP groups on specific interfaces.
To open the
IGMP Static Group Table
page, click
Router
→
IP Multicast
→
IGMP Static Group
Ta bl e
in the tree view.
Figure 8-21. IGMP Static Group Table
Interface
— Specifies the port, VLAN, or LAG to which the specific multicast group is assigned.
IP Multicast Group Address
— IP Multicast group address that is assigned to a interface.
New IP Multicast Group Address
—
The new IP Multicast group address assigned to an interface.
Assigning an Interface to a Multicast Group
1
Open the
IGMP Static Group Table.
2
Select an interface in the
Interface
field.
3
Select an IP Address in the
Multicast Group Address
field, or define a new multicast group
address in the
New Multicast Group Address
field
.
4
Click
Apply Changes
.
Displaying the Static Interface Grouping Table
1
Open the
IGMP Static Group Table
.
2
Click
Show All
to display the
Static Interface Grouping Table
.