Filter
Top Products
Configuring System Information 129
Status
— The connection status between the device and the TACACS+ server. The possible field
values are:
Connected
— There is currently a connection between the device and the TACACS+ server.
Not Connected
— There is not currently a connection between the device and the
TACACS+ server.
Single Connection
— Maintains a single open connection between the device and the TACACS+
server when selected
The TACACS+ default parameters are user-defined defaults. The default settings are applied to
newly defined TACACS+ servers. If default values are not defined, the system defaults are applied
to the new TACACS+ servers. The following are the TACACS+ defaults:
Source IP Address
— The default device source IP address used for the TACACS+ session
between the device and the TACACS+ server.
Key String (0-128 Characters)
— The default authentication and encryption key for TACACS+
communication between the device and the TACACS+ server.
Timeout for Reply (1-30)
— The default time that passes before the connection between the
device and the TACACS+ times out.
NOTE: You can set the values for the aforementioned defaults on the
TACACS+
Settings page
(System→ Management Security→
TACACS+
).
Defining
TACACS+
Parameters
1
Open the
OOB TACACS+ Settings
page.
2
Define the fields.
3
Click
Apply Changes
.
The TACACS+ settings are updated to the device.
Adding a
TACACS+
Server
1
Open the
OOB TACACS+ Settings
page.
2
Click
Add
.
The
Add OOB TACACS+ Host
page opens.
3
Define the fields.
4
Click
Apply Changes
.
The TACACS+ server is added, and the device is updated.
Deleting a
TACACS+
Server from the
TACACS+
Servers List
1
Open the
OOB TACACS+ Settings
page.
2
Click
Show All
.