Filter
Top Products
Configuring Routing 381
Viewing the DVMRP Prune Table Using CLI Commands
The following table contains the CLI command for viewing the Prune Table.
The following is an example of the CLI command:
Console> show ip dvmrp prune
Group Source Expiry Time
---------------------------------
224.192.78.88 171.68.0.0/16 00:02:52
224.192.78.89 171.68.0.0/16 00:08:52
DVMRP Route Table
The
DVMRP Route Table
page contains information about routes learned through DVMRP
router exchange. To open the
DVMRP Route Table
page, click
Router
→
IP Multicast
→
DVMRP
Route Table
in the tree view.
Figure 8-25. DVMRP Route Table
Source IP Address
— IP address of the source of the multicast routing information.
Source Mask
— Source IP address network mask.
Table 8-20. DVRMP Table CLI Commands
CLI Command Description
show ip dvmrp prune [group
group-address
] [
source-
address
]
Shows the table.