Filter
Top Products
Configuring Quality of Service 433
3
Select an interface from which to copy port bandwidth settings to all or any of the interfaces
listed in the Port Bandwidth
Settings Table.
4
Check the
Copy to
check box for each interface to which the port bandwidth settings should
be copied, or click
Select All
to copy the port bandwidth settings to all listed interfaces.
5
Click
Apply Changes
.
Defining Bandwidth Settings Using the CLI Commands
The following is an example of the CLI commands:
Console(config)# interface ethernet g5
Console(config-if)# traffic-shape 124000 96000
Console(config-if)# wrr-queue bandwidth 1 2 3 4 5 6 7 8
Console(config-if)# exit
Console(config)# priority-queue out num-of-queues 2
Console(config)# exit
Console> show qos interface ethernet g1 buffers
Ethernet g1
Notify Q depth:
qid-size
Table 10-4. Bandwidth Setting CLI Commands
CLI Command Description
traffic-shape {
committed-
rate committed-burst
}
[
queue-id
]
Sets shaper on egress port or queue.
wrr-queue bandwidth
weight1 weight2 ...
weight_n
Assigns Weighted Round Robin (WRR)
weights to egress queues.
priority-queue out num-
of-queues
number-of-
queues
Configures the number of strict priority
queues.
show qos interface
[ethernet
interface-
number
| vlan
vlan-id
|
port-channel
number
]
[buffers | queuing |
policers | shapers]
Displays the QoS interface information.