Filter
Top Products
Configuring Switch Information 251
VLAN ID
— Matches the packet’s VLAN ID to the ACE. The possible field values are 1-4094.
Action
— Indicates the ACL forwarding action. Possible field values are:
Permit
— Forwards packets which meet the ACL criteria.
Deny
— Drops packets which meet the ACL criteria.
Shutdown
— Drops packet that meet the ACL criteria, and disables the port to which the
packet was addressed. Ports are reactivated from the
Ports Configuration
page, see "Defining
Port Configuration."
Adding a MAC-Based ACL
1
Open the
Add ACE to MAC Based ACL
page
.
2
Click
Add
to open the
Add MAC Based ACL
page.
Figure 7-11. Add MAC Based ACL
3
Enter the
ACL Name
.
4
To add a new ACE to the newly created ACL, check the
New ACE Priority
check box and
define the
Source
and
Destination
MAC addresses,
VLAN ID
and
Action
fields.
5
Click
Apply Changes
.
The MAC-based ACL is defined, and the device is updated.
Modifying a MAC based ACE
1
Open the
Add ACE to MAC Based ACL
page
.
2
Select an ACL in the
ACL Name
field.
3
Modify the required fields.
4
Click
Apply Changes
.
The fields are modified, and the device is updated.