Filter
Top Products
366 Configuring Routing
www.dell.com | support.dell.com
Viewing the OSPF Link State Table Using CLI Commands
The following table contains the CLI commands for viewing the OSPF Link State Table.
The following is an example of the CLI commands:
console> show ip ospf database
OSPF Router with ID 200.1.1.11
Router Link States(Area 0)
Link IDADV RouterAgeSeq#ChecksumLink count
200.1.1.8200.1.1.813810x8000010D0xEF602
200.1.1.11200.1.1.1114600x800002FE0xEB3D4
200.1.1.12200.1.1.1220270x800000900x875D3
200.1.1.27200.1.1.2713230x800001D60x12CC3
Net Link States(Area 0)
Link IDADV RouterAgeSeq#Checksum
140.1.1.27200.1.1.2713230x8000005B0xA8EE
141.1.1.11200.1.1.1114610x8000005B0x7AC
Viewing the External Link State Table
The External Link State table contains external link state advertisement information. External
Link State table information is learned from sources other than OSPF routes. To display the
External Link State table page, click
Router
→
OSPF
→
External Link State Table
in the tree view.
Table 8-12. OSPF Link State CLI Commands
CLI Command Description
show ip OSPF
[
area-id
]
database
Displays information lists related to the OSPF database
for a specific router.