Filter
Top Products
Configuring Routing 345
Configuring Key Chains Using CLI Commands
The following table contains the CLI commands for configuring the key chains.
The following is an example of the CLI commands:
Console (config)# key chain M
Console (config-key-chain)# key 1
Console (config-key)# key-string mountain
Console (config-key)# accept-lifetime duration 13:30:00 Jan 25
2002 7200
Console (config-key)# send-lifetime duration 14:00:00 Jan 25 2002
3600
Console (config-key)# exit
Console (config)# exit
Console# show key-chains
Table 8-5. Key Chain CLI Commands
CLI Command Description
key-chain
name-
of-chain
Identifies an authentication key group.
key
key-id
Identifies an authentication key on a key chain.
key-string
text
Specifies an authentication string for a key.
accept-lifetime
start-time end-
time
| {infinite
|
start-time
|
duration
start-
time seconds
} no
accept-lifetime
Sets the time period during which the authentication key
is valid for authenticating incoming packets.
send-lifetime
start-time end-
time
| {infinite
|
start-time
|
duration
start-
time seconds
}no
send-lifetime
Sets the time period during which an authentication key is
valid to generate an MD5 digest for outgoing packets.
show key-chains
[
name-of-chain
]
Displays key chain information.