Filter
Top Products
346 Configuring Routing
www.dell.com | support.dell.com
key chain internal
key 1
accept: 13:30:00 Jan 25 2002 duration 7200
send: 14:00:00 Jan 25 2002 duration 3600
key 2
accept:14:30:00 Jan 25 2002 duration 7200
send:15:00:00 Jan 25 2002 duration 3600
key chain external
key 1
accept:13:30:00 Jan 25 2002 until 15:30:00 Jan 25 2002
send:14:00:00 Jan 25 2002 until 15:00:00 Jan 25 2002
key 2
accept:14:30:00 Jan 25 2002 until 16:30:00 Jan 25 2002
send:15:00:00 Jan 25 2002 until 16:00:00 Jan 25 2002
25 2002
Configuring RIP
Routing Information Protocol (RIP) is the most commonly used Internet standard for interior
gateway protocols. The protocol broadcasts routing information to determine the quickest route to
the next destination. RIP is a distance vector routing protocol that is best used in small networks.
Routes are determined through the smallest hop count. Routing updates contain pairs of values
consisting of an IP address and the distance to the node.
RIP version 2 does the following:
• Supports subnet masks.
• Provides authentication methods.
• Supports routing protocols.
• Provides larger distribution and smaller bandwidth overhead requirements.
You configure RIP on the
RIP
page. To open the
RIP
page, click
Router
→
RIP
in the tree view.
Defining RIP Global Parameters
The
RIP Global Parameters
page provides fields for enabling RIP on the device, establishing
redistribution of OSPF and redistribution of static routes.