Filter
Top Products
122
4.7.11 Setting the e-Mail Server (SMTP Server)
1. Select the [Network Settings] tab on the top menu.
2. Select the [SMTP Server] tab on the left side menu.
The "SMTP Server" screen appears.
3. Enter the SMTP server IP address, host name, or FQDN in the "Address" input field.
z For an IP address
The following format should be used xxx.xxx.xxx.xxx (xxx is a value from 0 to
255).
z For a host name or FQDN
This may be up to 255 characters long.
If an SMTP server is not required, leave this field blank.
4. Enter a port number from 1 to 65535, to be used by the scanner to communicate with
the SMTP Server.
The default setting is "25".
ATTENTION
e-Mail cannot be sent if authentication is required by the e-mail server
before sending.