Fujitsu FI-6010N Scanner User Manual


 
490
Others LDAP server response error. Try the following:
z Contact a system administrator
to check whether the LDAP
server is available.
z Enter a valid user name and
password.
LDAP server access failed. Check that
the LDAP access settings and LDAP
server settings are correct.
Try the following:
z Contact a system administrator
to check whether the LDAP
server is available.
z Enter a valid user name and
password.
LDAP server access failed. Check that
the LDAP access, LDAP server,
Authorized User (DN), Password and
Search Base settings are correct.
Try the following:
z Contact a system administrator
to check whether the LDAP
server is available.
z Enter a valid user name and
password.
The system date/time has been reset.
Check and correct the "Date/Time"
setting.
Check and correct the "Date/Time"
setting.
An error has occurred. Try turning the
power off and back on again. The
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help.
[alphanumeric eight digits]
Try the following:
z If the scanner does not restart
automatically, press the
[Shutdown] button on the
"Login" screen to turn the
power off, and turn the power
back on again to restart the
scanner.
z If the error status persists after
the scanner is restarted, press
the [Shutdown] button on the
"Login" screen, disconnect the
AC cable from the scanner to
turn the power off, wait for at
least 10 seconds, then reconnect
the AC cable and try turning the
power back on again. If the
error status persists, contact
your FUJITSU scanner dealer or
an authorized FUJITSU scanner
service provider.
Screen Message Action