Filter
Top Products
346
6.10 Enabling/Disabling the Scan Viewer
The "Scan Viewer" can be set to appear before the scanned data is processed.
The scanned data can be checked and edited on the "Scan Viewer". For details, refer to "6.11 Edit-
ing the Scanned Data in the Scan Viewer" (page 349).
If desired, in the following screens, the "Scan Viewer" can be set to be appear before the scanned
data is finally processed.
z "Send e-Mail" screen
z "Send Fax" screen
z "Print" screen
z "Save" screen
z "Scan to SharePoint" screen
z "Job Menu" screen
The following explains how to enable or disable the "Scan Viewer" using the "Send e-Mail"
screen.
1. On the "Send e-Mail" screen, press the [Scan Viewer] button.
Pressing the [Scan Viewer] button will toggle the setting back and forth between "On"
and "Off".
ATTENTION
When the [Scan Viewer] button is disabled on the "Job Menu" screen, it is not
possible to select whether or not to show the "Scan Viewer".