5.6 Setting the Central Admin Server
fi-6010N Network Scanner Operator's Guide 247
5
z Maximum Connections
Select the maximum number of scanners that can be connected simultaneously to the Central
Admin Server.
The default is "10".
z Wake-On-LAN
Configures the Wake-On-LAN settings to start the scanner to be controlled from the Central
Admin Server.
z Port Number
Enter the port number to be used to send magic packet for Wake-On-LAN.
The default is "443". The value can be specified within the range of 1 to 65535.
z # Tries
Select the number of times magic packet is sent for Wake-On-LAN.
The default is "3".
z Interval
Select the interval for sending magic packet for Wake-On-LAN.
The default is "1" sec.
■ Screen Settings
These settings are for the Central Admin Console main windows.
z Default Screen
Select the main window ("Scanner Admin Operations" or "Scanner Operation Monitor" win-
dow) to be shown after a Central Admin Console login.
z Screen Refresh Interval
Enter the interval in seconds, in which to automatically refresh the "Scanner Admin Opera-
tions" window and "Scanner Operating Monitor" window displays.
The default is 60 seconds.
■ LDAP Server
Configures the LDAP server used for the "Job Mode Settings" window displayed by selecting the
[Job Mode Settings] link on the "Scanner Admin Operations" window in the Central Admin Con-
sole.
z Enable LDAP searches
Select this checkbox to enable LDAP searches.
If the checkbox is not selected, the following items cannot be entered.
z LDAP Server Type
Select the type of the LDAP server to be connected.
z Use SSL
Select the checkbox to use SSL to communicate with the LDAP server.
z Certificate Only, CA not validated
Select this checkbox to validate the server certificate but not the certification path (certifi-
cate authority).
z LDAP Server
Enter the LDAP server IP address, host name, or FQDN.
This may be up to 255 characters long.
