Fujitsu FI-6010N Scanner User Manual


 
fi-6010N Network Scanner Operator's Guide 497
E
110D0002 Cannot connect to the LDAP
server.
Try the following:
z The network settings may not be valid.
Contact a system administrator to have
the network settings checked.
"8.3 Network Connection
Troubleshooting" (page 400)
z The server may not be working. Contact
a system administrator to have the server
status checked.
z If using SSL communication when
connecting to the LDAP server, contact
an administrator to check if the server
certificate, issued from a root
certification authority, is installed on the
LDAP server.
z Enter a valid user name and password.
110D000F Cannot connect to the LDAP
server. Check that the LDAP
access settings are correct and
that the LDAP server is running
and accessible.
Try the following:
z The network settings may not be valid.
Contact a system administrator to have
the network settings checked.
"8.3 Network Connection
Troubleshooting" (page 400)
z The server may not be working. Contact
a system administrator to have the server
status checked.
z If using SSL communication when
connecting to the LDAP server, contact
an administrator to check if the server
certificate, issued from a root
certification authority, is installed on the
LDAP server.
z Enter a valid user name and password.
110D0004 Access to network folder was
refused.
Contact a server administrator to find out if
an access permit has been set.
110D0005 Number of network path
connections has reached the
maximum allowed. No more
may be specified.
Close unneeded network connections, then
try specifying the desired network path
again.
110D0006 Invalid LDAP Search Base
format.
Contact a system administrator to have the
LDAP search base format corrected.
"4.7.8 Setting the Login LDAP Server"
(page 105)
Code Message Action