Fujitsu FI-6010N Scanner User Manual


 
456
Add-in
Software
Specified Add-in data contents are
invalid.
Check the contents of the specified
Add-in module.
Specified Add-in file cannot be
applied to this system.
Check the system version, prepare
the correct version of the update
file, and try again.
Specified Add-in could not be
uploaded.
Try the following:
z Check if the specified update
file is correct, and try again.
z Specified update file may not
be uploaded because of a
network error. Check the
network status.
System version xx or later is required
to install the specified Add-in.
Update the system, and then install
the Add-in module.
Admin Tool Connection error. For more details about the process,
refer to "8.3.3 Failure to Access
the Scanner using a Web Browser,
Admin Tool, or Central Admin
Server" (page 409).
Cannot connect to this system version. Install the Admin Tool from the
scanner, and try again.
Job Settings Session has timed out. Click the
"Close" button in the toolbar to close
the edit settings window.
Close the edit settings window,
and try again.
A fatal error has occurred. Close the
Job Settings session, then try again. If
the problem persists, the administrator
should contact the FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider for help.
Close the Job Settings session, and
try again.
Insufficient memory to continue.
Close the Job Settings session, then try
again.
Ensure that there is enough
memory capacity available, and try
again.
Insufficient free disk space to
continue. Close the Job Settings
session, then try again.
Ensure that there is enough free
disk space available, and try again.
Screen Message Action