Filter
Top Products
2.2 Using the Scanner Buttons
fi-6010N Network Scanner Operator's Guide 25
2
(*2): z When the scanner startup button is pressed while a window displaying the
[Shutdown] button is shown, the [Please release the startup button and select
shutdown to turn the scanner off.] message appears.
z When the scanner startup button is pressed while a window not displaying the
[Shutdown] button is shown, the [Please release the startup button. Can not
shutdown scanner because the system is in operation.] message appears.
ATTENTION
When the scanner is starting up or in standby mode, be careful to never
hold the startup button down for 4 seconds, as this will cause the scanner to
shutdown. If this happens, saved scanned data may become unusable.
If the startup button is accidentally held down too long, causing the scanner
to shutdown, temporally detach the AC adaptor to ensure that the power is
completely off.
After turning the power off, wait for at least 10 seconds before turning the
power back on again. To shutdown the scanner correctly, press the [Shut-
down] button on the "Login" screen.
HINT
z The idle time before standby mode entered can be changed. For details,
refer to "4.6.6 Setting the Time to Standby Mode" (page 66).
z Automatic login without displaying the "Login" screen is possible. For more
details about how to set automatic login, refer to "4.6.7 Setting the Login
Method" (page 68).