Filter
Top Products
502
12020005 Fax size exceeded maximum
fax size allowed by the SMTP
server.
Contact a system administrator to check
the "Maximum Attachment Size" setting.
"4.7.11 Setting the e-Mail Server (SMTP
Server)" (page 122)
12020006 SMTP server connection was
lost while sending fax data.
Try the following:
z Check that the LAN cable of the scanner
and SMTP server is connected properly.
z Contact a system administrator to check
that the scanner IP address and SMTP
server settings are correct.
"8.3 Network Connection
Troubleshooting" (page 400)
z Contact a system administrator to check
that the SMTP server is working
properly.
z Contact a system administrator to check
the maximum e-mail size allowed by
the SMTP server.
12020100 Error: fax could not be sent. Try the following:
z A message returned from the server is
attached. Contact a server administrator
to deal with the error.
z If the [e-Mail address of user] option
button is selected for "Notification To
(Sender's e-Mail Address)", an error will
occur when a job sequence is per-
formed in the following cases:
z If the currently logged in user does
not have an e-mail address
z If logged in with the guest account
In this case, specify a user with a
registered e-mail address and perform
the job sequence.
Code Message Action