Filter
Top Products
fi-6010N Network Scanner Operator's Guide 473
E
Scanning Insufficient memory. Try turning the
power off and back on again. If
problem persists, the administrator
should contact the FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider for help
Try the following:
z Reduce the size of the scan data
or set a lower resolution level,
and try again.
z If the scanner does not restart
automatically, press the
[Shutdown] button on the
"Login" screen to turn the
power off, and turn the power
back on again to restart the
scanner.
z If the error status persists after
the scanner is restarted, press
the [Shutdown] button on the
"Login" screen, disconnect the
AC cable from the scanner to
turn the power off, wait for at
least 10 seconds, then reconnect
the AC cable and try turning the
power back on again. If the
error status persists, contact
your FUJITSU scanner dealer or
an authorized FUJITSU scanner
service provider.
Screen Message Action