Fujitsu FI-6010N Scanner User Manual


 
fi-6010N Network Scanner Operator's Guide 503
E
12030001 Cannot find the network printer
path.
Try the following:
z Check that the LAN cable of the scanner
and print server is connected properly.
z Contact a network administrator to
check that the print server is working
properly.
z Check that the spooler is operating
properly.
z Contact a system administrator to check
that the scanner IP address and network
printer settings are correct.
"8.3 Network Connection
Troubleshooting" (page 400)
12030002 Access to network printer was
refused.
Contact a server administrator to find out if
an access permit has been set.
12030005 Network is busy. Try again
later.
Wait for a while, and try again.
12030006 User name or password may be
incorrect.
Re-enter the user name and password.
12030007 Not connected to the network. Check that the system network is
functioning normally by performing a ping
test from another machine in the network,
other than from a machine in the same
server as network printer. If the system
network is not operating correctly, refer to
"Failure to connect to a server using its IP
address" (page 405) for further solutions.
1203000A Number of network path
connections has reached the
maximum allowed. No more
may be specified.
Close unneeded network connections, then
try specifying the desired network path
again.
1203000C Specified user is no longer able
to login to this network printer.
Try the following:
z Login a with different account.
z Contact a network administrator to have
the account validated.
1203000D Specified password is no longer
valid for this network printer.
Try the following:
z Login a with different account.
z Contact a network administrator to have
the password validated again.
Code Message Action