Fujitsu FI-6010N Scanner User Manual


 
408
Failure to add a network printer
If adding a network printer to/from the scanner is not possible, try the following steps. Also, refer
to how to set printer settings, how to add a network printer, and the printer manual before hand.
Failure to print on a network printer
If printing on a network printer which has been set in the scanner is not possible, try the following
steps. Also, refer to how to set the printer settings, how to add a network printer, or the printer
manual before hand.
No. Problem Action
1 The Windows XP printer driver has not
been installed on the print server.
Install the Windows XP printer driver on
the print server.
Check that the Windows XP printer driver
has been correctly installed on the print
server. For more details, refer to "4.7.13
Setting the Network Printers" (page 125).
2 Network printer shared name has been
changed.
Check the shared name on the print server.
3 The specified network printer path is
invalid.
Check that the specified network printer
path is correct.
No. Problem Action
1 Printer is not usable, due to an out of
paper error, paper jam, or similar problem.
Check whether or not the printer is ready
for printing, deal with the cause of the
error, and try again.
2 Same as in "Failure to connect to a server
using its IP address" (page 405).
Check if a network connection is possible
by trying the same solution for "Failure to
connect to a server using its IP address"
(page 405).
3 Not authorized to print on network printer. Contact the administrator to check if
printing is allowed on the network printer.
4 Printing is impossible due to a printer or
spooler error.
Try the following:
z Check that printing is possible from the
print server application.
z Check that the print server spooling is
operating normally.