7.7 Changing the Keyboard Cover
fi-6010N Network Scanner Operator's Guide 389
7
7.7 Changing the Keyboard Cover
1. Remove the keyboard cover from the scanner.
2. Remove any remaining adhesive tape.
3. Turn the keyboard cover over and remove the paper backing from the top strip of dou-
ble-sided tape.
4. Align the top edge of the keyboard cover with the protruding guides, and firmly
smooth the double-sided tape down.
Align and attach the top-left corner first, then the center, and last the top-right corner.
Pay particular attention
to these areas
Underside
Paper backing tape
Top-left guide
Top-center guide
Top-right guide
Top
attachment
area
1
2
3