Fujitsu FI-6010N Scanner User Manual


 
fi-6010N Network Scanner Operator's Guide 515
E
12010006 SMTP server connection was
lost while sending e-mail.
Try the following:
z Check that the LAN cable of the
scanner and SMTP server is connected
properly.
z Contact a system administrator to check
that the scanner IP address and SMTP
server settings are correct.
"8.3 Network Connection
Troubleshooting" (page 400)
z Contact a system administrator to check
that the SMTP server is working
properly.
z Contact a system administrator to check
the maximum e-mail size allowed by
the SMTP server.
12010100 Error: e-mail could not be sent. Try the following:
z A message returned from the server is
attached after the message displayed on
the left. Contact a server administrator
to deal with the error.
z Contact a server administrator to check
that access to the e-mail server is not
restricted.
z If the [e-Mail address of user] option
button is selected for [To] and/or
[From], an error will occur during the
job process in the following cases:
z If the currently logged in user does
not have an e-mail address
z If the currently logged in user is
using the guest account
In this case, specify a user with a
registered e-mail address and perform
the job sequence.
Code Message Action