Filter
Top Products
7
Series 90–70 Remote I/O Scanner User’s Manual – July 1992106
Displaying Other Circuits
In monitor mode, the HHM will step through I/O modules in the following sequence:
1. %I, all references used
2. %AI, all references used
3. %Q, all references used
4. %AQ, all references used
To display additional circuits within the currently–selected memory type, press the F1
(>) key. The HHM will step through each available circuit.
To jump directly to a particular device, memory type, or address, press F2 (ref). This
screen appears, to enter the desired information.
MNTR _
chng entr
1. Enter the reference number. Press F3 (entr).
2. If you want to select a different reference type (for example, to display %AQ
instead of %I), press F2 (chng) to toggle the memory type.
3. With the desired information displayed, press F3 (entr) to monitor the circuit.