Filter
Top Products
7
Series 90–70 Remote I/O Scanner User’s Manual – July 1992110
Analog values can be displayed in decimal, signed decimal, or hex using the
programmer function keys. For example, here the first analog input is shown in signed
decimal format:
POINT # INPUT (nickname)
0064 +0091 00011001 00101010 00011001 01010100 01001001 00101100
019210100011 00101010 01001010 10101000 01100101 01010011 00101010 01101111
025610101001 01010101 10101010 11111001 01111010 10111010 11111111 11111111
032001100000 00000000 00000000 00000000 00011010 00011010 00000111 01000000
038411111111 11111111 11111110 11000111 11111110 01101010 01100000 00000000
Similarly, in the Output Table, outputs for the remote drop will start at the reference
configured for the first discrete output module. The first 48 output bits the Remote I/O
Scanner receives from the PLC will be scanned into the discrete output modules. The
next 32 output bits received from the PLC will be scanned into the analog output
modules.