Filter
Top Products
4
Series 90–70 Remote I/O Scanner User’s Manual – July 199266
Enabled/Disabled, Transition Positive/Negative, and Input Filter Time. Configure such
selectable features as appropriate for your application.
Note
Such module features can only be selected using the Logicmaster
90–70 software. If a remote drop is configured (or reconfigured) using a
Genius Hand–held Monitor, the I/O boards in the remote drop will
operate in default mode only––optional features cannot be selected.
Return to the Rack Display
After configuring a module, press ESC to return to the Remote Drop rack display.
If Auto I/O Map is ON, the offset in the map determines the offset for the module. This
is the reference address displayed on the Remote Drop configuration screen, as shown
above. This beginning reference address can be changed on the I/O map (on the
Remote I/O Scanner configuration screen, or after module configuration, by
responding Y to the prompt).
If Auto I/O Map is OFF, entering a module or changing a reference address does not
change the I/O map.