Filter
Top Products
4
Series 90–70 Remote I/O Scanner User’s Manual – July 199264
during the Store operation. XXX stands for a Drop ID of 016 to 254. This can be
changed on the SNP ID screen. The last three digits of the SNP ID refer to the Remote
I/O Scanner’s Drop ID and cannot be changed directly.
Sweep Control Entries
Most applications will use the default programmer and communications windows
times.
Programmer window time. The range is 0 to 255 milliseconds. 10mS is
the default.
Communications window time. The range is 0 to 255 milliseconds.
255mS is the default.
When you complete the Remote I/O Scanner configuration, press the ESC key to
return to the Remote Drop rack display.
If Auto I/O Map is turned ON and no lengths have yet been assigned, no I/O map
entries appear on this screen, as illustrated below.
If you have assigned a length to any data type, the beginning address for that data
type appears in the I/O map:
In the above example, lengths have been assigned to %I, %Q and %AI, but not to
%AQ.
Prog Window
Comm
Window