Filter
Top Products
5 - 19
Administration
Start > Settings > Control Panel > Administration
AppLock is designed to be run on certain certified Windows CE based devices only. The AppLock program is installed as
part of the default software load and is configured with the Administration control panel.
Configuration parameters are specified by the AppLock Administrator for the Thor VM2 end-user. AppLock is password
protected by the Administrator.
End-user mode locks the end-user into the configured application or applications. The end user can still reboot the mobile
device and respond to dialog boxes. The administrator-specified applications are automatically launched in the specified
order and run in full screen mode when the device boots up.
When the mobile device is reset to factory default values, for example after a cold reset, the Administrator may need to
reconfigure the AppLock parameters.
The assumption, in this section, is that the first user to power up a new mobile device is the system administrator.
Note: AppLock Administrator Control panel file Launch option does not inter-relate with similarly-named options contained
in other Thor VM2 Control Panels.
Note: A few applications do not follow normal procedures when closing. AppLock cannot prevent this type of application
from closing, but is notified that the application has closed. For these applications, AppLock immediately restarts the
application (see Auto Re-Launch) which causes the screen to flicker. If this type of application is being locked, the
administrator should close all other applications before switching to end-user mode to minimize the screen flicker.
AppLock is updated periodically as new options become available. Contact Technical Assistance (page 11-1) for update
availability.
Factory Default Settings - AppLock
Application (page 5-23)
Filename Blank
Title Blank
Arguments Blank
Order 1
Internet Disabled
Global Key Ctrl+Spc
Global Delay 10 sec
Input Panel Disabled
Application Launch Options (page 5-24)
Auto at Boot Enabled
Auto at Boot Retries 0
Auto at Boot Delay 10 sec
Auto Re-launch Enabled
Auto Re-launch Retries 0
Auto Re-launch Delay 0 sec
Manual Launch Disabled
Allow Close Disabled
Security (page 5-26)
Hotkey (Activation key) Shift+Ctl+A
Password Blank
Options (page 5-27)
Launch timeout 60000