Filter
Top Products
8 - 13
Note: Tap the Commit button to save changes. If this panel is closed before tapping the Commit button, changes are
not saved!
Admin Password SUMMIT
(or Blank)
A string of up to 64 alphanumeric characters that must be entered when
the Admin Login button is tapped. If Hide Password is On, the password
is masked when typed in the Admin Password Entry dialog box. The
password is case sensitive. This value is masked when the Admin is
logged out.
Options are: none.
Auth Timeout 8 seconds Specifies the number of seconds the Summit software waits for an EAP
authentication request to succeed or fail.
If the authentication credentials are stored in the active profile and the
authentication times out, the association fails. No error message or
prompting for corrected credentials is displayed.
If the authentication credentials are not stored in the active profile and
the authentication times out, the user is again prompted to enter the cre-
dentials.
Options are: An integer from 3 to 60.
Certs Path System A valid directory path, of up to 64 characters, where WPA Certificate Au-
thority and User Certificates are stored on the mobile device when not
using the Windows certificates store. Ensure the Windows folder path
exists before assigning the path in this parameter. See Certificates
(page 8-30) for instructions on obtaining CA and User Certificates. This
value is masked when the Admin is logged out.
Options are: none.
For example, when the valid certificate is stored as My Computer/Sys-
tem/MYCERTIFICATE.CER, enter System in the Certs Path text box as
the Windows folder path.
Ping Payload 32 bytes Maximum amount of data to be transmitted on a ping.
Options are: 32 bytes, 64, 128, 256, 512, or 1024 bytes.
Ping Timeout ms 5000 The amount of time, in milliseconds, that a device will be continuously
pinged. The Stop Ping button can be tapped to end the ping process
ahead of the ping timeout.
Options are: Any number between 0 and 30000 ms.
Ping Delay ms 1000 The amount of time, in milliseconds, between each ping after a Start
Ping button tap.
Options are: Any number between 0 and 30000 ms.
Parameter Default Function