Filter
Top Products
5 - 30
• Other Bluetooth devices cannot be discovered if they have been set up to be Non-Discoverable or Invisible.
• When Filtered Mode is enabled, the Thor VM2 can pair with one Bluetooth scanner and one Bluetooth printer.
• When Filtered Mode is disabled, the Thor VM2 can pair with up to four Bluetooth devices
• It is not necessary to disconnect a paired scanner and printer before a different scanner or printer is paired with the Thor
VM2.
• The target Bluetooth device should be as close as possible (up to 32.8 ft (10 meters) Line of Sight) to the Thor VM2 during
the pairing process.
Assumption: The System Administrator has Discovered and Paired targeted Bluetooth devices for the Thor VM2. The Thor
VM2 operating system has been upgraded to the revision level required for Bluetooth client operation. An application (or
API) is available that will accept data from serial Bluetooth devices.
Bluetooth Devices
The Bluetooth Devices tab displays any device previously discovered and paired with the Thor VM2.
Discover
Tap the Discover button to locate all discoverable Bluetooth devices in the vicinity. The Discovery process also
queries for the unique identifier of each device discovered.
Stop Button
Tap Stop at any time to end the Discover and Query for Unique Identifier functions. Devices not paired are not
shown after any reboot sequence.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the Thor VM2 Bluetooth
scanning range, the Bluetooth connection between the paired device and the Thor VM2 is lost. There may
be audible or visual signals as paired devices disconnect from the Thor VM2.