Filter
Top Products
Software Tools
1606218 02 08/2006 103
Existing EDS File for CANopen Advantys FTB Splitter Box
EDS File The configuration software tool suite allows you to make full use of your Advantys
FTB splitter box and can be used to create a new EDS file (see Creating a New EDS
and DCF Configuration File, p. 104).
If you do not use the Advantys Configuration Tool (ACT), you may use the EDS files
supplied on the FTX ES 0• CD whose names are specified in the following table:
For each splitter box, an assigned EDS file to be used is supplied:
Type of splitter box EDS file name Image name
FTB 1CN08E08SP0 TEFTB01P01E.eds
TEFTB01P01E_r.dib (run)
TEFTB01P01E_s.dib (stop)
TEFTB01P01E_d.dib (diag)
FTB 1CN12E04SP0 TEFTB02P01E.eds
TEFTB02P01E_r.dib (run)
TEFTB02P01E_s.dib (stop)
TEFTB02P01E_d.dib (diag)
FTB 1CN16EP0 TEFTB03P01E.eds
TEFTB03P01E_r.dib (run)
TEFTB03P01E_s.dib (stop)
TEFTB03P01E_d.dib (diag)
FTB 1CN16EM0 TEFTB03P01E.eds
TEFTB03M01E_r.dib (run)
TEFTB03M01E_s.dib (stop)
TEFTB03M01E_d.dib (diag)
FTB 1CN16CP0 TEFTB04P01E.eds
TEFTB04P01E_r.dib (run)
TEFTB04P01E_s.dib (stop)
TEFTB04P01E_d.dib (diag)
FTB 1CN16CM0 TEFTB04MP01E.eds
TEFTB04M01E_r.dib (run)
TEFTB04M01E_s.dib (stop)
TEFTB04M01E_d.dib (diag)
FTB 1CN08E08CM0 TEFTB05M01E.eds
TEFTB05M01E_r.dib (run)
TEFTB05M01E_s.dib (stop)
TEFTB05M01E_d.dib (diag)
RISK OF UNINTENDED EQUIPMENT OPERATION
Do not modify the EDS file manually, and do not use any configuration tools that
have not been approved by Schneider Electric. All modifications must be made
using the Advantys Configuration Tool, or be carried out by qualified Schneider
Electric personnel.
Failure to follow this instruction can result in death, serious injury, or
equipment damage.
WARNING