Filter
Top Products
Installation
1606218 02 08/2006 23
EMC Compatibility
Product
Compliance
This product complies with the European directive 89/336/CEE on "electromagnetic
compatibility".
The products described in this manual meet all the conditions regarding
electromagnetic compatibility and are compliant with the applicable standards.
However, this does not mean that the electromagnetic compatibility of your
installation is assured.
This is why it is strongly recommended to follow all indications concerning an EMC
compliant installation. Only in these conditions and thanks to the exclusive use of
CE approved components, will the devices used be deemed as compliant with the
EMC directives.
When handling the products, ensure that all safety measures related to
electromagnetic compatibility and all conditions for the use of the products are
complied with by all persons concerned. This is especially important when handling
products sensitive to electrostatic discharges.
e
RISK OF ELECTROMAGNETIC INTERFERENCE AND UNINTENDED
EQUIPMENT OPERATION
The products described in this manual contain highly complex semiconductors that
can be damaged or destroyed by electrostatic discharges (ESD). If, for example,
they are used within the vicinity of devices rated as class A or B according to IEC
6100-4-4, the level of electromagnetic interference may be enough to cause the
device to operate unexpectedly, and/or to damage it.
Damage may not necessarily cause a failure or malfunction that is immediately
detectable. It may occur sporadically or in a delayed manner.
If there is a risk of electromagnetic interference, the system designer must
implement the necessary protective measures.
Failure to follow this instruction can result in death, serious injury, or
equipment damage.
WARNING