Filter
Top Products
Application-Specific Functions
1606218 02 08/2006 75
Description of Discrete Outputs
Discrete Outputs The discrete outputs are controlled by a command in the sub-index of object 6200H.
For each output, the following parameters may be modified:
Polarity (object 6302H)
Filter mask (object 6308H)
In the event of an error (loss of communication with the master for example), the
fallback mode is applied.
The state of the output is determined by the configuration registers as described
below:
OPTIO-
NAL
FILTER
6306H
SWITCH
IF 0H
Single
Digital
Output
Change
Polarity
{OH,1H}
{O,1}
CHANGE
POLAR-
ITY
ENTRY
into 6200H
6300H
6307H
Fallback Value
Filter
Mask
{E,D}
{O,1}
Switch if
Device
Failure
Fallback Mode
{O,1}
{O,1}
{E,D}
{O,1}
6302H 6308H