Filter
Top Products
CANopen Network Interface
46
1606218 02 08/2006
Configuring the Address and Transmission Speed
Method Follow the steps below:
Illustration of the
Rotary Switches
Assignment of
the Address on
the Network
The CANopen address is configured using two specially designed rotary switches.
Addresses can be configured from 1 to 99. Address zero (0) cannot be used.
Step Action
1 Switch off the power supply to the splitter box.
2 Unscrew both screws on the transparent cover.
3 Set the communication speed.
4 Set the splitter box address.
5 Screw the transparent cover back on.
6 Power up the splitter box.
Element Function
1 Sets the transmission speed
2 Node-ID x 10
3 Node-ID x 1
2 3
DATA
RATE
NODE ADDRESS
X10 X1
1
0
1
2
3
4
5
6
8
9
7
0
1
2
3
4
5
6
8
9
7
0
1
2
3
4
5
6
8
9
7
Note: When assigning the addresses, ensure that each splitter box is assigned to
a single address.
A configured address is registered at power up. It cannot be changed if you do not
remove the cover.