Filter
Top Products
Installation
20
1606218 02 08/2006
Method Follow the steps below:
Step Action
1 Position the splitter box on the support.
2 Mount the splitter box using the screws and washers.
RISK OF EQUIPMENT DAMAGE AND NON-COMPLIANCE WITH IP67.
Unused connectors must not be left unprotected. If a connector is not correctly
connected to the end of another connector or to a standard cable, fit a sealing plug
in order to ensure that the product is IP67 standard compliant. To ensure the IP67
protection index, check that the cover is screwed onto the base splitter box and that
all connectors are fitted with cables or sealing plugs.
Failure to follow this instruction can result in injury or equipment damage.
CAUTION