Filter
Top Products
Splitter Box Characteristics and Wiring
1606218 02 08/2006 29
Electrical Characteristics
Splitter Box
Characteristics
Input
Characteristics
Output
characteristics
Characteristic Description
Splitter box's internal consumption 120 mA
Splitter power supply voltage 18...30VDC
Splitter and sensor supply current ≤ 8 A
Actuator supply current ≤ 8 A
Under-voltage detection yes
Characteristic Description
Compliance with IEC 1131-2 Type 2
Compliance with 2-wire/3-wire sensor Yes
Rated power voltage 24 VDC
Maximum current 200 mA (for 2 diagnostics input channels)
Logic Positive PNP Sink
Filtering input 1 ms
Protection against reverse polarity and short-
circuit in sensor power supply
Yes
Overload and over-voltage protection Yes
Characteristic Description
Output type Transistors
Output voltage 24 VDC
Output current 1.6 A
Over-voltage protection Yes (transient diode)
Maximum switching cycle 20 Hz
Maximum lamp load 10 W
Connection for outputs / cable lengths
0.75mm
2
: 10 m maximum (AWG 19 / 32.8 ft)
0.34 mm
2
: 5 m maximum (AWG 23 / 16.4 ft)
Protection against short-circuits yes