Filter
Top Products
CANopen Network Interface
1606218 02 08/2006 47
Adjustment of
the
Transmission
Speed
The transmission speed is configured using a rotary switch.
The following transmission speeds are possible:
Switch position Transmission speed
0 Automatic recognition
1 10 Kbits/s
2 20 Kbits/s
3 50 Kbits/s
4 100 Kbits/s
5 125 Kbits/s
6 250 Kbits/s
7 500 Kbits/s
8 800 Kbits/s
9 1 Mbits/s
Note: Two different operating modes are possible:
With a set speed of (10 Kbit/s to 1 Mbits/s), the transmission speed of the splitter
box must be the same as that of the other devices on the network.
In automatic recognition mode, at least one of the slaves on the network must
be configured to the speed of the Master.
For each case, if the required condition is not observed, the splitter box will not be
recognized by the network ( it will remain in the "Init" state).