Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
105
DGS-3627:admin# debug bgp show network
Command: debug bgp show network
Network Route Map
------------- -----------
192.168.0.0/8 NULL
172.16.0.0/16 map1
Total Entries :2
DGS-3627:admin#
debug bgp show aggregate
Purpose This command is used to display the current aggregate’s configuration in the BGP protocol
stack.
Syntax
debug bgp show aggregate
Description This command is used to display the current aggregate’s configuration in the BGP protocol
stack.
Parameters None.
Restrictions Only Administrator level users can issue this command.
Example usage:
Configure BGP to show the current aggregate’s information:
DGS-3627:admin# debug bgp show aggregate
Command: debug bgp show aggregate
Network Summary Only AS Set Suppress Count
------------- ------------ ------- -------------
192.168.0.0/8 YES NO 0
172.16.0.0/16 NO NO 0
Total Entries :2
DGS-3627:admin#
debug bgp show damp
Purpose This command is used to display the current dampening configuration and corresponding
dynamic information in the BGP protocol stack.
Syntax
debug bgp show damp
Description This command is used to display the current dampening configuration and corresponding
dynamic information in the BGP protocol stack
Parameters None.
Restrictions Only Administrator level users can issue this command.
Example usage:
Configure BGP to show the current dampening information: