Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
303
DGS-3627:admin# config double_vlan Drazen delete 1:4-1:8
Command: config double_vlan Drazen delete 1:4-1:8
Success.
DGS-3627:admin#
show double_vlan
Purpose Used to display the Double VLAN settings on the Switch.
Syntax
show double_vlan {<vlan_name>}
Description This command will display the current double VLAN parameters configured on the Switch.
Parameters
vlan_name − Enter the name of a previously created VLAN for which to display the settings.
Restrictions None.
Example usage:
To display parameters for the Double VLAN “RG”:
DGS-3627:admin# show double_vlan RG
Command: show double_vlan RG
Global Double VLAN : Enabled
====================================================
SPVID : 2
VLAN Name : RG
TPID : 0x9100
Uplink Ports :
Access Ports : 1:4-1:8
Unknow Ports :
----------------------------------------------------
Total Entries : 1
DGS-3627:admin#
enable pvid auto_assign
Purpose Used to enable auto assignment of PVID.
Syntax
enable pvid auto_assign
Description If “Auto-assign PVID” is enabled, PVID will be possibly changed by PVID or VLAN
configuration. When a user configures a port to VLAN X’s untagged membership, this
port’s PVID will be updated with VLAN X. In the form of VLAN list command, PVID is
updated with the last item of the VLAN list. When a user removes a port from the
untagged membership of the PVID’s VLAN, the port’s PVID will be assigned with
“default VLAN”. The default setting is enabled.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the auto-assign PVID: