xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
257
show dnsr
Purpose Used to display the current DNS relay status.
Syntax
show dnsr {static}
Description This command is used to display the current DNS relay status.
Parameters
static − Allows the display of only the static entries into the DNS relay table. If this parameter is
omitted, the entire DNS relay table will be displayed.
Restrictions None.
Example usage:
To display DNS relay status:
DGS-3627:admin# show dnsr
Command: show dnsr
DNSR Status : Disabled
Primary Name Server : 0.0.0.0
Secondary Name Server : 0.0.0.0
DNSR Cache Status : Disabled
DNSR Static Table Status : Disabled
DNS Relay Static Table
Domain Name IP Address
-------------------------------- ---------------
www.123.com.tw 10.12.12.123
Total Entries: 1
DGS-3627:admin#