Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
612
DGS-3627:admin# show ssh algorithm
Command: show ssh algorithm
Encryption Algorithm
3DES : Enabled
AES128 : Enabled
AES192 : Enabled
AES256 : Enabled
Arcfour : Enabled
Blowfish : Enabled
Cast128 : Enabled
Twofish128 : Enabled
Twofish192 : Enabled
Twofish256 : Enabled
MD5 : Enabled
SHA1 : Enabled
RSA : Enabled
DSS : Enabled
DGS-3627:admin#
config ssh authmode
Purpose Used to update user authentication for ssh configuration.
Syntax
config ssh authmode [password | publickey | hostbased] [enable | disable]
Description The config ssh user command update the ssh user information.
Parameters
password - Specifies user authentication method.
publickey - Specifies user authentication method.
hostbased - Specifies user authentication method.
enable - Enable user authentication method.
disable - Disable user authentication method.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To config user authentication method:
DGS-3627:admin# config ssh authmode publickey enable
Command: config ssh authmode publickey enable
Success.
DGS-3627:admin#
show ssh authmode
Purpose Used to show user authentication method.
Syntax
show ssh authmode
Description The show ssh authmode command show the user authentication method.
Parameters None.
Restrictions None.