Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
457
DGS-3627:admin# disable mirror
Command: disable mirror
Success.
DGS-3627:admin#
show mirror
Purpose Used to show the current ports mirroring configuration on the switch.
Syntax
show mirror {group_id <value 1-4>}
Description The show mirror command displays the current mirror function state and mirror session
configuration on the switch. If don’t specify the “group_id” parameter, display the all mirror
settings.
Parameters
group_id - The mirror group identify.
value - The mirror group identify value.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To display mirroring configuration:
DGS-3627:admin# show mirror
Command: show mirror
Mirror Global State: Enabled
Group State Target Port Source Ports
-----------------------------------------------------
1 Enabled 2:1 RX: 1:1
TX: 1:1
3 Enabled 3:5 RX: 1:24
TX: 1:24
DGS-3627:admin#
create mirror group_id
Purpose Used to create a mirror group on the switch.
Syntax
create mirror group_id <value 1-4>
Description This command used to create a mirror group. If the mirror group has existed, do nothing and
return success.
Parameters
group_id - The mirror groups identify.
value - The mirror groups identify value.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
Create mirror group 3: